Hanging a garden in a few simple steps.
One drill or a nail, a few steps and not much of your afternoon. This is the whole ceremony, in order.
In the boxThe seven stepsPlant care guide Step 01 · Unboxing
Everything in the box.
Lay it all out first. If one of these is missing, write to us before you drill anything.
Wooden board
The canvas itself, with the hanging slot cut near the top.
Recycled PVC pocket
Cut from retired banners. One Medium pocket with the Small board, two with the Long.
Wall hook
One screw hook. The whole board hangs on it.
Wall anchor
So the hook bites properly.
Canvas hooks
Front of the board: they carry the pocket.
07 The seven steps
The install
Seven steps to a living wall.
Tick them off as you go. The page remembers where you were.
0 /7 0 of 7 done
- 01 Unbox everything Lay the parts out and check them against the list above: board, pocket, wall hook, anchor and the canvas hooks.
- 02 Drill the wall Mark one point at the height you want, check it with a level, and drill.
- 03 Hook into the wall Push the anchor into the hole, then screw the wall hook into the anchor.
- 04 Hooks onto the front Screw the canvas hooks into the front of the board. They are what the pocket will hang from.
- 05 Hang the board Lift the board and set the slot near its top over the wall hook. One hook carries the whole board.
- 06 Hang the pocket Hook the pocket onto the front of the board.
- 07 Soil and plant Fill the pocket with substrate, plant your plant, water it in. From here it only gets greener.
0 /7 0 of 7 done
Still have a question?
The FAQ answers what people ask us most about hanging, watering, plants, delivery and returns. If yours is not there, write to us and we reply within one working day.
Read the FAQWrite to us